How do I network my wireless PC card
If you want to add a wireless adapter card on you computers, you might encounter some compatibility issues when trying to access the internet and connect to another PC that is using a wired LAN connection. Even if so far the wireless router you were using worked just fine, now if the new wireless network adapter is not totally compatible to you router, then the signal strength might be seriously decrease even when you are in its immediate vicinity. An immediate solution is orientating the antenna toward the signal transmitter. If this doesn’t work, then maybe the wireless PC card is recognized by the computer.
Your wireless network pci card has to be properly installed before even attempting to create a network connection. If you are using windows XP, then you should start worrying about the wireless network’s security, because it is not automatically set and if the network is not secured then you might discover a lot of other persons connecting to your desktop. If you discover that someone is connected to your internet connection, you can simply limit their access from the router’s configuration settings.
Install the appropriate wireless drivers from the installation CD you will be getting with the pci card. Network adapters need the right web drivers installed before starting the configuration of the broadband internet access and entering the config setting or changing access ports. The desktop computer should be able to sustain even a USB wireless adapted. In this case, you should consider getting an additional wireless antenna for a better coverage, or buying another access point or even a wireless network repeater.
If you decide to buy an 802.11g or 11b wireless adapter then you will in fact be getting a better wireless range. Manufactures say that the adapters and routers that use this new technology have been tested and they provided about 50% more wireless coverage. For a MAC desktop, you will need an Ethernet wireless adapter. They are usually immediately compatible with the already installed network, as long as almost all PCs in the networking area are using the MAC operating system.
If some of them have windows XP or Vista, connection might be difficult unless there are changes made in the network setting. All computers must have the access password and username, and also they have to use the same encryption method. Setting the same WPA encryption as well as a similar ip address that belongs to the same domain will aid the connection. In general, access can be granted by securing the network and then accessing it only thought the secured channel.
Networking a desktop computer’s wireless card is not such a difficult task after all. In most cases the result will be immediate and will come from simply following the manufacturer’s instructions. When this doesn’t happen as expected, you can try the various tricks presents for a faster solution.
Got something to say? Click here to reply
